XCOM 2 Message Board  

DOWNLOAD TRAINER: Link

VIDEO DEMONSTRATION: Link


1ad5avk8lw

Options
-------------------------------

Numpad 1: Capture Unit
Numpad 2: Mega Health
Numpad 3: Mega Aim
Numpad 4: Mega Mobility
Numpad 5: Mega Will
Numpad 6: Mega Hack
Numpad 7: Mega Armor
Numpad 8: Mega Dodge
Numpad 9: Capture Resources
F1: Add Supplies
F2: Add Intel
F3: Add Alloys
F4: Add Elerium
F7: Add Engineer
F8: Add Scientist
Numpad /: Unlimited Moves/Action
Numpad *: Expose Map
Numpad 0: Add 99 Elerium Cores (Must have at least 1)


Notes
-------------------------------

Numpad 1: Capture Unit - to use this you must first click away or tab away
from the character you wish to affect. Or if you are in the barracks,
use the arrows at the bottom of the screen to move to a different
character. Next, press this button and then select the character
you wish to affect with the next options (or click the arrows to
get to the character you want if you are in the barracks). You
can then modify health, aim, etc. You have about 2 seconds to
click on or select the unit you wish to affect before this option
turns off.

Numpad 2: Mega Health - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 3: Mega Aim - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 4: Mega Mobility - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 5: Mega Will - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 6: Mega Hack - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 7: Mega Armor - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 8: Mega Dodge - make sure you have used the Capture Unit option
properly and then press this option key to modify the value. If
you are in combat, you will not notice it has changed until you
have moved. The value written can be modified using the custom
trainer ability.

Numpad 9: Capture Resources - you must use this option FIRST before
using any of the research options below. First, make sure you
are inside the Geoscape ship. Click on the Armory section of
the ship. Next, click this option and then click ESC to leave
the armory. The option activates and then deactivates in
about 2 seconds. You need to press ESC and leave the armory
before the 2 seconds is up.

F1: Add Supplies - make sure to use the Capture Resources option
above before using this. Each press adds more. You may need
to go to the Armory again and then back to see that the
values have changed. Also, it's best to use this only RIGHT
AFTER you use the Capture Resources option. Using this option
after you start research, or build something the resources
locations in memory may have changed.

F2: Add Intel - make sure to use the Capture Resources option
above before using this. Each press adds more. You may need
to go to the Armory again and then back to see that the
values have changed. Also, it's best to use this only RIGHT
AFTER you use the Capture Resources option. Using this option
after you start research, or build something the resources
locations in memory may have changed.

F3: Add Alloys - make sure to use the Capture Resources option
above before using this. Each press adds more. You may need
to go to the Armory again and then back to see that the
values have changed. Also, it's best to use this only RIGHT
AFTER you use the Capture Resources option. Using this option
after you start research, or build something the resources
locations in memory may have changed.

F4: Add Elerium - make sure to use the Capture Resources option
above before using this. Each press adds more. You may need
to go to the Armory again and then back to see that the
values have changed. Also, it's best to use this only RIGHT
AFTER you use the Capture Resources option. Using this option
after you start research, or build something the resources
locations in memory may have changed.

F7: Add Engineer - this option requires that you have turned on the
developer console in the game. Instructions to do that are included
below. To use this option, make sure you are in the Geoscape Ship.
Press this key and the game will add 1 more of this type to
the game. Look at the *HOW TO TURN ON THE DEVELOPER CONSOLE!
instructions below.


see readme for more

[Edited by PWizard, 3/19/2016 5:29:57 PM]

WOOT!

Here we go, lads and ladies!!
THANKS for this!!! 💛 💛 💛

[Edited by mrpayday, 2/5/2016 3:35:06 AM]

Awesome, thank you!

You goddamn wizards! That is some incredibly fast turnaround. Thanks much and always appreciated.

You guys are awesome! You do amazing work to get this trainer out so fast.

Awesome!

Wow, that was fast! Thanks for the hard work