Creeper World 3 Arc Eternal Message Board  

Doesnt work for me with version 2.08 Steam.
After activation in main menu and starting a level I place my command node, wait until it has 25 energy and press Num2, I hear "Trainer activated" again and nothing happens. Energy is depleting normally and not Infinite. After some seconds I get a popup error message with "Couldn't find gamecode"

Guys? Am I alone with this problem? :-)

The current trainer has been tested with the latest steam version of the game and it still works. Make sure you have produced some energy (game is NOT paused) and then press hotkey and wait for second 'trainer activated'.

Hi, thanks for answering :-)

I have the latest Steam Version 2.08 and its not working. I placed the Command Node, waited for some energy and pressed Num1 and Num2, all I get is this:

<20:52:21> [PROCESS]: Found CW3
<20:52:35> [TRAINER]: Activating...
<20:52:36> HASH: 5139F9F238249DEBF98D8CAD10AC0A83
<20:52:36> [PROCESS]: Version: 4.3.3.96362
<20:52:36> [PROCESS]: Version(2): 4.3.3.96362
<20:52:36> [TRAINER]: Successfully activated
<20:53:15> [ERROR]: Couldn't find game code! (0)
<20:53:34> [ERROR]: Couldn't find game code! (0)

[Edited by spirix, 9/4/2014 1:55:56 PM]

You are hitting F1 at the main menu right? Also make sure you are only pressing one key at a time and waiting for the second Activated sound before pressing it again.

And just to note, the Num1 option is almost useless. It has a tendency to make enemy units like crawlers invincible as well. When it happens turning the code off doesn't work, you have to turn it off, leave the map and then come back before they will be vulnerable again.

Also you have to have a collector placed in order for the infinite energy command to work.

[Edited by robgw3, 9/23/2014 12:04:58 PM]

When i do this, the trainer works: (but only the infinite Energy option)

- Start Trainer
- Start Game
- Press F1 on Main Menu
- Place your Command Node
- Build at least one Energy node
- Press Num 2 while Energy bar ist going up.
- Listen for the first and wait for the second "Activated"
- Press Num 2 again, Energy should now be unlimited.

But like i said, for me the only function which works ist the infinite energy one. Sometimes the Unlimited ammo too, but only for some Towers, not for all.

Any idead why the others like unlimited AC don't work? (because unlimited AC would be really awesome.)

Thanks for this trainer, it grants a lot of fun.

Ok for the Infinite Ammo option you have to have the cannons connected to the grid to start with, at least until they have been built and ammo has been sent to them. Then you can move them anywhere you want to. However they will not get infinite ammo until they have shot at something, so cannons that never have enemies come near them will not get the infinite ammo. Also the code never worked for snipers, or mortars, or the aircraft either. I wish they would fix that, but got no response when I asked if they could do it.

Unlimited AC is a bit tricky, try this out. Make sure you have a mine down as soon as you can then hit the option for unlimited AC. After it has been activated then exit the mission, as soon as you exit, go back in and load from the save. When you go back in the command centers you have down that are connected to the mine should have unlimited AC. This will almost always work for 1 command center, but with 2 or 3 sometimes one will not get the infinite AC for some reason. If that happens try to place the one that doesn't have infinite somewhere that they wont need to use AC and rely on the one(s) that do have infinite.

There is no issue with the trainer. It does activate in a strange way.

For Infinite Energy, make sure you have a collector node down before activating. It the reason why it is unable to find the code since the collector node is not even down yet. After putting it down, activate the code. Sometime it will say deactivate. Keep pressing until it said activated then it will get Infinite Energy. Problem with this is that it need to have at least one collector node down to have that infinite. Removing all will make the energy become 0. Same for the reactor.

For AC. Same thing applied above. It need the miner node down first before activating the code. It didn't need any relay connect to it. Just drop it down and it will show the AC level, then hit the code. It will activate.

Ammo. It need to shoot and getting ammo from Command before activating the code.

One issue I noticed with Commands is that they don't have a shared Energy and AC. If drop one Command at the beginning of the game and activating the code will enable the first Command to get the unlimited. Then later on, dropping the second Command will not get the Unlimited Energy unless that second command have the collector or the reactor connect to it. Same thing for the AC. It need the miner node connect to the second command to get the unlimited.

This is the reason why it the way it works. Sometime it will say Game Code is not found because it haven't get something it need for the game to work. Make sure reactor/collector and miner node is down before enabling the cheat. Also it will delay sometime because it is looking for the code and then say deactivated. Just keep pressing the cheat to get the activated sound.

This trainer work great, by the way. Happy with it

Forgot one more thing. If you want to get the more Aether point, use CoSMOS. They always have three address for Aether point. Make sure you pause the game and edit the value all three address at once. And those address is not always fixed for Aether, they always change depends on the world.

Edited: add Aether comment

[Edited by aquafusiondane, 11/29/2014 1:50:13 PM]